Waea Node Transponder, SA120IE
Whakaahuatanga Poto:
Ko tenei whakakitenga hua e hipoki ana i nga momo momo DOCSIS® me EuroDOCSIS® 3.0 o te raupapa o nga hua o te Waea Pouwhanga Waea Whakamau.I roto i tenei tuhinga, ka kiia ko SA120IE.Ko te SA120IE he whakamarokehia te pāmahana mo te whakauru ki etahi atu hua e hiahiatia ana kia mahi i roto i te taiao o waho, i te tino wera ranei.I runga i te mahi Full Band Capture (FBC), ko te SA120IE ehara i te Pouwhanga Cable anake, engari ka taea hoki te whakamahi hei Kaitirotiro Spectrum (SSA-Splendidtel Spectrum Analyzer).Ko te Heatsink he whakahau me te tono motuhake.E toru nga kohao PCB e whakaratohia ana huri noa i te PTM, kia taea ai te whakapiri i te taiapa whakamahana, te taputapu rite ranei ki te PCB, hei whakawhiti atu i te wera i puta mai i te PTM, ki te whare me te taiao.
Taipitopito Hua
Tohu Hua
Ngā Āhuatanga Pouwhanga Taura
▶DOCSIS/EURODOCSIS 1.1/2.0/3.0, Hononga hongere: 8*4
▶E rua nga hononga MCX (Wahine) mo Raro me Runga
▶Homai nga Tohu MDI Giga Ethernet e rua-Tauranga ki te aro ki te poari (Paari Mamati) ma J1 me J2
▶Tikina te Kaihiko DC mai i te Poari Whakatau ma te whakamahi J2
▶Tuatahi Kaitiaki o waho
▶ Pūoko pāmahana i runga i te poari
▶Rahi iti (ahua): 113mm x 56mm
▶ Te taumata hiko RF tika 2dB i nga awhe pāmahana katoa
▶FBC mo te Spectrum Analyzer, integrated Splendidtel Spectrum Analyzer (SSA)
▶ Tautokohia te Aratau Mana Iti me te Aratau Mahi Katoa Ka taea te huri
Nga waahanga SW
▶ Tuhinga®/Euro-DOCSIS®HFC taiao kitea aunoa
▶ UART / I2C / SPI / GPIO te whakarite taraiwa mo nga momo aroturuki taputapu.Pērā i te Node Fiber, Whakawhiwhi Hiko, RF Amplifier
▶Tuhinga MIBs / Tetahi atu tautoko MIB kua whakaritea
▶Tuwhera te punaha API me te hanganga raraunga mo te 3rdte urunga tono a te roopu
▶ Te tohu tohu hiko iti.Ko te tohu kei raro iho i te -40dBmV ka whakaatuhia me te Kaitirotiro Spectrum kua hangaia
▶ Kei te tuwhera nga konae CM MIB mo nga kaihoko
▶ Kei te waatea te GUI Tukutuku whakahaere CM i runga i te WAN, i te LAN ranei
▶ Ka taea e MSO te whakaara ano i te CM i tawhiti ma Telnet, SNMP ranei
▶Ka taea te huri i waenga i te aratau Piriti me te Pouara
▶E tautoko ana i te whakamohoa taputapu DOCSIS MIB
Poraka Pūnaha
Kaitiaki o waho
Ka whakamahia he kaitiaki o waho ki te whakarite kia pono te mahi a te punaha.Ka whanahia e te kaitutei e te
Firmware i nga wa katoa, kia kore ai te CM e tautuhi.Mena he he kei te CM
Firmware, ka muri i tetahi waa (wa kaitutei), ka tautuhi aunoa te CM.
Tawhā Hangarau
| Tautoko Kawa | ||
| ◆ DOCSIS/EuroDOCSIS 1.1/2.0/3.0◆ SNMP v1/v2/v3◆ TR069 | ||
| Hononga | ||
| RF: MCX1, MCX2 | E rua MCX Wahine, 75 OHM, Koki Tika, DIP | |
| Tohu Itarangi/PWR: J1, J2 | 1.27mm 2x17 PCB Tāpae, Koki Tika, Tauranga Itarangi SMD2xGiga | |
| RF Raro | ||
| Auautanga (te taha ki te tapa) | ◆ 88~1002 MHz (DOCSIS)◆ 108~1002 MHz (EuroDOCSIS) | |
| Aratuku Hoera | ◆ 6 MHz (DOCSIS)◆ 8 MHz (EuroDOCSIS)◆ 6/8 MHz (Hoki Aunoa, Aratau Ranu) | |
| Whakawaenga | 64QAM, 256QAM | |
| Reiti Raraunga | Tae atu ki te 400 Mbps ma te hononga 8 Channel | |
| Taumata Tohu | Tuhinga: -15 ki te +15 dBmVEuro Tuhinga: -17 ki te +13 dBmV (64QAM);-13 ki te +17 dBmV (256QAM) | |
| RF whakarunga | ||
| Awhe Auautanga | ◆ 5~42 MHz (DOCSIS)◆ 5~65 MHz (EuroDOCSIS)◆ 5~85 MHz (Kōwhiringa) | |
| Whakawaenga | TDMA: QPSK,8QAM,16QAM,32QAM,64QAMS-CDMA: QPSK,8QAM,16QAM,32QAM,64QAM,128QAM | |
| Reiti Raraunga | Tae atu ki te 108 Mbps ma te 4 Channel Bonding | |
| Taumata Putanga RF | TDMA (32/64 QAM): +17 ~ +57 dBmVTDMA (8/16 QAM): +17 ~ +58 dBmVTDMA (QPSK): +17 ~ +61 dBmVS-CDMA: +17 ~ +56 dBmV | |
| Whatunga | ||
| Kawa whatunga | IP/TCP/UDP/ARP/ICMP/DHCP/TFTP/SNMP/HTTP/TR069/VPN (L2 me L3) | |
| Ararere | DNS / DHCP tūmau / RIP I me II | |
| Tiri Ipurangi | NAT / NAPT / tūmau DHCP / DNS | |
| Putanga SNMP | SNMP v1/v2/v3 | |
| tūmau DHCP | He tūmau DHCP i hangaia hei tohatoha i te wāhitau IP ki te CPE na te tauranga Ethernet a CM | |
| Kaihoko DCHP | Ka whiwhi aunoa a CM i te IP me te wahitau tūmau DNS mai i te tūmau MSO DHCP | |
| Hangaia | ||
| Ahu | 56mm (W) x 113mm (L) | |
| Taiao | ||
| Whakauru Mana | Tautokohia te whakauru hiko whanui: +12V ki +24V DC | |
| Whakamahi Hiko | 12W (Make.)7W (TPY.) | |
| Te Waahi Mahi | Tauhokohoko: 0 ~ +70oC Ahumahi: -40 ~ +85oC | |
| Te haumākū whakahaere | 10~90% (Kaore i te Whakawhanake) | |
| Paemahana Rokiroki | -40 ~ +85oC | |
Tuhono Poari-ki-Poari i waenga i te Poari Mamati me te CM
E rua nga papa: Papa Mamati me te Poari CM, e wha nga takirua o nga hononga papa-ki-poari hei tuku tohu RF, tohu Mamati me te hiko.
E rua nga hononga hono MCX e whakamahia ana mo DOCSIS Raro me te Waitohu RF Whakarunga.E rua nga takirua Pin Pane/Tupapa PCB e whakamahia ana mo nga Tohu Mamati me te Mana.Ko te poari CM kei raro i te Poari Mamati.Ka whakapā atu te PTM a CM ki te whare na roto i te papa waiariki ki te whakawhiti i te wera mai i te PTM ki te whare me te taiao.
Ko te teitei e hono ana i waenga i nga papa e rua he 11.4+/-0.1mm.
Anei te whakaahuatanga o te hononga papa-ki-papa:
Tuhipoka:
Take oHoahoa Poari-ki-Poari mo nga Poari PCBA e ruas,kia mau ai te hononga pono, na reira,inahea
To hoahoa i te Whare, me whai whakaaro ki nga mahi miihini me nga wiri hei whakatika.
MCX1, MCX2: 75 OHM, Wahine, Koki Tika, DIP
MCX1: DS
MCX2: US
MCX Tane i taurite: 75 OHM,Male, Koki Tika, DIP
J1, J2: 2.0mm 2x7 PCB turanga, Koki Tika,SMD
J1: Whakamaramatanga Pin (Tuamata)
| J1 Pin | Poari CM | Poari Mamati | Nga korero |
| 1 | GND | ||
| 2 | GND | ||
| 3 | TR1+ | Nga Tohu Giga Ethernet mai i te poari CM. KORE he kaitahuri Ethernet i runga i te papa CM, kei konei anake nga Tohu MDI Ethernet ki te Poari Mamati.Ko te RJ45 me te whakawhiti Itarangi ka tuu ki te Poari Mamati. | |
| 4 | TR1- | ||
| 5 | TR2+ | ||
| 6 | TR2- | ||
| 7 | TR3+ | ||
| 8 | TR3- | ||
| 9 | TR4+ | ||
| 10 | TR4- | ||
| 11 | GND | ||
| 12 | GND | ||
| 13 | GND | Ko te poari mamati e whakarato ana i te Power to CM board, ko te awhe taumata mana;+12 ki te +24V DC | |
| 14 | GND |
J2: Whakamaramatanga Pin (Tuamata)
| J2 Pin | Poari CM | Poari Mamati | Nga korero |
| 1 | GND | ||
| 2 | Tautuhi Anō | Ka taea e te poari mamati te tuku tohu tautuhi ki te poari CM, katahi ka tautuhi ano i te CM.0 ~ 3.3VDC | |
| 3 | GPIO_01 | 0 ~ 3.3VDC | |
| 4 | GPIO_02 | 0 ~ 3.3VDC | |
| 5 | UART Whakahohe | 0 ~ 3.3VDC | |
| 6 | UART Tuku | 0 ~ 3.3VDC | |
| 7 | UART Whiwhi | 0 ~ 3.3VDC | |
| 8 | GND | ||
| 9 | GND | 0 ~ 3.3VDC | |
| 10 | SPI MOSI | 0 ~ 3.3VDC | |
| 11 | KAraka SPI | 0 ~ 3.3VDC | |
| 12 | SPI MISO | 0 ~ 3.3VDC | |
| 13 | Tīpakohia te maramara SPI 1 | 0 ~ 3.3VDC | |
| 14 | GND |
Ahu PCB
